Skip to main content

Antelope Valley Line Gameplay Guide

Kevin Miodek
Updated

This guide has been designed to help players get the most out of the Antelope Valley Line: Los Angeles - Lancaster Route Add-On. Below you will find information about the content available for this route, including links to community videos. Each of our video links demonstrate what a successful run may look like and can be used to help players having difficulty with a particular scenario.

Locomotives

  • EMD F125 Metrolink
  • Rotem Bi-Level Cab Car Metrolink
  • Metrolink F59PHR (Add-On)

Training

Rail Journeys

California Dreaming Chapters:

  • Spirited L.A.
  • Escaping from L.A.
  • Remote Worker
  • Going Back to Cali
  • In-n-Out
  • Extra
  • Mission Specialist
  • Filling In

F59PHR Fanatic Chapters (Add-On):

  • Ready For Launch
  • LAC Commute
  • Retro

Scenarios

Achievements

  • ALV: Freshman (Complete EMD F125 Training Module)
  • ALV: Action! (Complete Scenario 'Impossible Mission' on Antelope)
  • ALV: West Coast Railroader (Drive EMD F125 for 125 miles)

Route Map

Frequently Asked Questions

How do I successfully complete the "Take a Hike" scenario?

When you find the hiker, open the doors, walk up to them. Then make your way back to the train and make sure the yellow objective marker on the map follows you back to the train. When you get to the final station, talk to Grant Smith, and he will congratulate you on the rescue.

What is the start-up procedure for the EMD F125?

  1. Turn on the Generator Field.
  2. Insert the Reverser Handle.
  3. Set the Brake Mode to Passenger.
  4. Set the Reverser to Forward.
  5. Apply power using the Master Controller.
  6. Release the Automatic Brake.

How do I recover from an emergency brake application in the EMD F125?

  1. Come to a complete stop.
  2. Reset the Master Controller to Idle.
  3. Set the Independent Brake to Full Service.
  4. Release the Automatic Brake.
  5. Set the Automatic Brake to Full Service.
  6. Apply power using the Master Controller.
  7. Release the Automatic and Independent Brake.

How do I enable the passenger lighting in EMD F125?

  • Press the HEP On button on the rear panel.

What is the start-up procedure for the Rotem Bi-Level Cab Car?

  1. Turn on the Generator Field switch.
  2. Turn on the Cab Setup switch.
  3. Insert the Reverser Handle.
  4. Set the Reverser to Forward.
  5. Set the Automatic Brake Cut Out to Cut In.
  6. Apply power using the Master Controller.
  7. Release the Automatic Brake.

How do I recover from an emergency brake application in the Rotem Bi-Level Cab Car?

  1. Come to a complete stop.
  2. Reset the Master Controller to Off.
  3. Set the Reverser to Neutral.
  4. Set the Automatic Brake to Suppression.
  5. Apply power using the Master Controller.
  6. Release the Automatic Brake.

Video Guides

TSW Add-On Database

Please visit the Train Sim World Add-On Database for further details on this add-on, including:

  • Conductor Mode Support
  • Route Hopping Support
  • Additional Layers
  • Platform Differences
  • Gen 8 Compatibility

 

Route Timetable Locomotive Requirements

Antelope Valley Line: Los Angeles - Lancaster Route Add-On (ALV)

 

Original

 

 AC4400CW UP (CCB) ALV, CJP, CCB
BNSF ES44C4 (CJP) ALV, CJP
BNSF SD70ACe (CJP) ALV, BNSF SD70ACe, CJP
SD70ACe UP (SMH) ALV, CJP, SMH

SD70ACe MP (Heritage)

 

 ALV, CJP, SMH, UPHeritage
SD70ACe WP (Heritage) ALV, CJP, SMH, UPHeritage
SD70ACe KT (Heritage) ALV, CJP, SMH, UPHeritage
SD70ACe RG (Heritage) ALV, CJP, SMH, UPHeritage
SD70ACe NW (Heritage) ALV, CJP, SMH, UPHeritage
SD70ACe SP (Heritage) ALV, CJP, SMH, UPHeritage
EMD F125 Metrolink (AVL) ALV
F7 (CJP) ALV, Santa Fe F7
Rotem Bi-Level Cab Car Metrolink ALV

 


 

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk